Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Price
Price
Trending
Special Products
There are 432 products.
MDT-SCN-P360R3.01-Mounting frame Slimline,For Presence Detectors with 3 sensors
AED0.00
Tax included
Mounting frame for surface mounting of Presence Detector ,Dimensions (W x H x D): 75mm x 75mm x 14mm
MDT-SCN-G360K3.02-Glass Presence Detector, 3 sens,Light- and temp. sensor, constant light (Coverage 11m, Presence 5m)
AED0.00
Tax included
The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and high resolution lens.
MDT-SCN-G360D3.02-Glass Presence Detector, 3 sens.,Light- and temp. sensor (Coverage 11m, Presence 5m)
AED0.00
Tax included
Last items in stock
The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and high resolution lens.
MDT-SCN-P360E3.03-Presence Detector, 3 sensors,Temperature sensor and LED night light (Coverage 11m Ø, Presence 5m Ø
AED0.00
Tax included
The MDT Presence Detector with light sensor captures smallest movements with 3 sensors and high resolution lens.With integrated temperature sensor and LED night light. For installation on standard MR16 mounting frames.
MDT-SCN-BWM55.02-To fit 55mm systems/ranges,White matt finish
AED0.00
Tax included
Last items in stock
The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitoring. The brightness of the room is measured by the integrated light sensor and made available as an object.
SCN-BWM55.G2-White glossy finish
MDT-VC-0701.04 - 7" / 17,7cm capacitive True Glass TFT Display, Flush mounted
AED0.00
Tax included
Last items in stock
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
Optional:
VCB-07WS.04
Glass cover frame white
To fit VC0701.04 touchpanel
VCB-07SW.04
Glass cover frame black
To fit VC0701.04 touchpanel
VCB-07SI.04
Cover frame brushed stainless steel look
To fit VC0701.04 touchpanel
MDT-VC-1001.04 - 10" / 25,6cm capacitive True GlassTFT Display, Flush mounted
AED0.00
Tax included
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
Optional:
VCB-10WS.04
Glass cover frame white
To fit VC1001.04 touchpanel
VCB-10SW.04
Glass cover frame black
To fit VC1001.04 touchpanel
VCB-10SI.04
Cover frame brushed stainless steel look
To fit VC1001.04 touchpanel
MDT-VCS-PRO.04 - Programming software VisuControl Pro,To create individual solutions
AED0.00
Tax included
Last items in stock
Programming software VisuControl Pro,To create individual solutions
MDT-VC-EASY.02- 2SU MDRC- Object server with iPhone/iPad App,
AED0.00
Tax included
The MDT VisuControl Easy object server is used for the visualisation of the current building status and to controlbuilding functions via iOS app.
MDT-RF-LK001.02-KNX RF+ Line Coupler,Flush mounted, commissioning with ETS5
AED0.00
Tax included
The MDT KNX RF+ Line Coupler connects MDT KNX RF+ devices to the KNX bus. The Line Coupler offers extensive filter functions to reduce the KNX RF+ bus load.
MDT-RF-GTT4W.01-KNX RF+ Glass Push Button Plus 4-fold with Actuator,White, with temperature sensor
AED0.00
Tax included
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
Also Available:
RF-GTT8S.01
KNX RF+ Glass Push Button Plus 8-fold with Actuator
Black, with temperature sensor
RF-GTT4S.01
KNX RF+ Glass Push Button Plus 4-fold with Actuator
Black, with temperature sensor
RF-GTT8W.01
KNX RF+ Glass Push Button Plus 8-fold with Actuator
White, with temperature sensor
MDT-RF-TA55A2.01-KNX RF+ Push Button Plus 2-fold with Actuator ,White glossy finish, status and orientation LED
AED0.00
Tax included
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
Also Available
RF-TA55A8.01
KNX RF+ Push Button Plus 8-fold with Actuator
White glossy finish, status and orientation LED
RF-TA55A4.01
KNX RF+ Push Button Plus 4-fold with Actuator
White glossy finish, status and orientation LED
RF-TA55A6.01
KNX RF+ Push Button Plus 6-fold with Actuator
White glossy finish, status and orientation LED
MDT- RF-BE2230.01-KNX RF+ Universal Interface 2-fold,Flush mounted, for 230VAC signals
AED0.00
Tax included
The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
MDT-RF-AKK2UP.01- KNX RF+ Switch Actuator 2-fold Flush mounted, 230VAC, 10A
AED0.00
Tax included
Last items in stock
The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.Each output uses a monostable relay.
Also Available
MDT-RF-JAL1UP.01- KNX RF+ Shutter Actuator 1-fold,Flush mounted, 230VAC, 10A
AED0.00
Tax included
The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.The output uses two monostable relays.
MDT-RF-AKK1ST.01- KNX RF+ Socket, 230VAC, 16A
AED0.00
Tax included
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
HDMI™/CAT 5/6 extender
AED0.00
Tax included
for extending HDMI™ signals to up to 60 m
amplifies the HDMI™ signal via CAT5 / CAT6 cables for increased range
supports HDTV at a resolution of up to 1080p
3D-enabled for cable lengths of up to 60 m
supports HDCP 1.0/ 1.1
easy to install and use
Network cable tester Firewire
AED0.00
Tax included
for testing CAT 5/6 network and ISDN connections
has RJ11, RJ45, USB (type A), Mini USB (type B), and IEEE1394 6pin Firewire socket
checks lines for short circuit, wire reversal, and cable defect
connection tester with integrated LED display for 8 individual cores
power supply is a 9 V block (not included in delivery)
protective pouch included in delivery
CYP-AU-1HARC HDMI to Stereo Audio (2 Phono) ARC extractor
AED0.00
Tax included
The AU-1HARC is designed to extract the audio signal from any ARC (Audio Return Channel) enabled HDTV and convert it to a line-level analogue stereo signal. This device is perfect for use with HDTV's with no dedicated audio output allowing the audio to be extracted from the ARC enabled HDMI connection and sent to a non-HDMI equipped amplifier, AVR, or active speakers. It supports HDMI audio sampling rates up to 192 kHz and provides an analogue 2-channel stereo output using the integrated DAC (Digital to Analogue Converter).
CYP-CM-388M HDMI Down-Scaler with Bypass Output
AED0.00
Tax included
There are not enough products in stock
The CM-388M is designed to convert digital signals from a HDMI (or DVI + Coaxial) source to Composite Video or S-Video for NTSC or PAL systems with L/R stereo audio. Besides Composite Video and S-Video outputs, this device also provides one HDMI bypass output to deliver the original signal, and a simultaneous Coaxial output to send S/PDIF digital audio to an audio amplifier.
GOOBAY-96011-MICROWAVE MOTION SENSOR
AED0.00
Tax included
There are not enough products in stock
Microwave motion sensor
Flush mounting; 360° detection, 8 m range, indoor use (IP20), suitable for LEDs
miniaturisation allows almost invisible mounting in raised or cavity ceilings/lamps
high frequency sensors detect movements even through glass, wood, plasterboard walls, etc.
especially usable for indoor lighting, lamps, LEDs, etc.
accurate detection of people and animals in darkness or twilight
multi adjustable sensor for optimal detection setup
designed for the easy and quick flush-mounting
CYP-PUV-2010TXWP-100m HDBaseT™ 2.0 Wall Plate Transmitter
AED0.00
Tax included
There are not enough products in stock
PUV-2010TXWP 100m HDBaseT™ 2.0 Wall Plate Transmitter (4K, HDCP2.2, PoH, LAN, OAR, USB)
The PUV-2010TX Wall Plate Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology
CYP-PUV-2010RXWP-100m HDBaseT™ 2.0 Wall Plate Receiver
AED0.00
Tax included
There are not enough products in stock
PUV-2010RXWP 100m HDBaseT™ 2.0 Wall Plate Receiver (4K, HDCP2.2, PoH, LAN, OAR, USB)
The PUV-2010RXWP UK Wall Plate Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m.
GOOBAY-USB-C™ HDMI adapter (4k 60 Hz)
AED0.00
Tax included
There are not enough products in stock
USB-C™ male > HDMI™ female (Type A)
mirrors signals from USB-C™ to HDMI™ devices
suitable for computers and smart devices with USB-C™ ports
supports a resolution up to 3840 x 2160p at 60Hz and 3D
very easy to operate
CYP-DS-MSC14-4K22-1×4 4K UHD Video Wall Controller
AED0.00
Tax included
The DS-MSC14-4K22 has been designed to provide an easier and more convenient way to create and deploy video wall installations.
Delivering complete scalability, and capable of driving up to four 1080p displays, all from a single 4K UHD source. For larger installations multiple DS-MSC14-4K22 units can be combined to create up an 8x8 configuration.
CYP-PU-515PL-TX-HDMI over Single CAT5e/6/7 HDBaseT™ Transmitter
AED0.00
Tax included
HDMI over Single CAT5e/6/7 HDBaseT™ LITE Transmitter with PoC and 2-Way IR (up to 60m)
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-PU-515PL-RX-HDMI over Single CAT5e/6/7 HDBaseT™ Receiver
AED0.00
Tax included
PU-515PL-RX HDMI over Single CAT5e/6/7 HDBaseT™ LITE Receiver with PoC and 2-Way IR (up to 60m)
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
GOOBAY-38530-USB-C ™ adapter DisplayPort 4k60Hz, black
AED0.00
Tax included
USB-C ™ plug> DisplayPort socket
mirrors signals from USB-C ™ to DisplayPort devices
suitable for the MacBook with USB-C ™ port
supports a resolution up to 3840 * 2160p @ 60Hz and 3D
very easy to use
CYP-QU-18S 1 to 8 Rack Mountable HDMI Distribution Amplifier
AED0.00
Tax included
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
CYP-AU-D4 Analogue Audio Converter
AED0.00
Tax included
The AU-D4 is designed to convert analogue stereo audio to Digital Coaxial and Optical (Toslink) outputs simultaneously.