Active filters

  • Categories: AV Components
  • Categories: KNX Components
CYP-AU-DTI4-TX Dante Transmitter with 4 Channels of balanced Mono inputs
AED0.00
Tax included
0 Review(s) 
​The AU-DTI4-TX is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring. Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.
CYP-AU-DTO4-RX Dante Transmitter with 4 Channels of balanced Mono inputs
AED0.00
Tax included
0 Review(s) 
​The AU-DTO4-RX is a Dante input to 4-channel analogue audio output receiver. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring. Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.
CYP-PUV-44XPL-4K22-KIT 4 x 4 HDMI HDBaseT™ LITE Matrix
AED0.00
Tax included
0 Review(s) 
with 2x Independent HDMI outputs & Audio De-embedding (4K, HDCP2.2, PoH, 60m) inc. 4x PUV-1210PL-RX Receivers ​​​The PUV-44XPL-4K22-KIT is a HDMI/HDBaseT LITE Matrix which supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT LITE outputs and 2 independent HDMI outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
MDT-SCN-WS3HW.01-Weather Station Home,Outdoor installation on wall or pole, integrated BCU
AED0.00
Tax included
0 Review(s) 
Weather Station Home 3 channels for sun protection to control blind/shutter Sun protection up to three facades Offers wide functions to control facades (2 switching tresholds,teach in function) Central shutter control for Up/Down via brightness value(with time dealy) Brightness value for east, south, west, twilight Generates a day/night object Wind speed value, alarm if wind speed exceeds limit Temperature value Suited to control facades at home Installation on wall or pole 5m connection cable No additional power supply required Integrated bus coupling unit (control unit) 3 years warranty
CYP-PUV-44XPL-AVLC-KIT 4 x 4 HDMI HDBaseT™ LITE Matrix
AED0.00
Tax included
0 Review(s) 
The PUV-44XPL-AVLC is the next generation of 4 x 4 matrices from CYP, taking much of its heritage from the successful PUV-44XPL-4K22. The Matrix supports the transmission of video (resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT outputs. Despite the 10.2Gbps limitation of HDBaseT™ technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (including Dolby Vision) to be extended to a compatible receiver included in the kit. 
MDT- SCN-RS1R.01-Rain Sensor, Outdoor installation on wall, integrated BCU
AED0.00
Tax included
0 Review(s) 
Rain Sensor Production in Germany, certified according to ISO 9001 Automatic heating to keep the sensor area dry Heating operation by choke free output STV-640/STC Series or external 24VDC power supply Current consumption of heating is less than 100mA 5m bus connection cable Stainless fastening angle included in delivery Dimensions (W x H x D): (67mm x 67mm x 29mm) Integrated bus coupling unit 3 years warranty
CYP-AU-11SA De-embed Audio from HDMI (7.1)
AED0.00
Tax included
0 Review(s) 
The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your audio format to your amplifier.This device has advanced firmware allowing audio to be de-embedded without the need to connect the HDMI display (no sink-end required).
MDT-OR-42-4K22 4 x 2 HDMI Matrix Switcher (4K, HDCP2.2, HDMI2.0)
AED0.00
Tax included
0 Review(s) 
This 4x2 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to either of the two connected HDMI displays. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
CYP-EL-8500VA Advanced 4K HDMI, USB Type C, VGA, and HDBaseT Presentation Switch
AED0.00
Tax included
0 Review(s) 
​The EL-8500VA is a multi-format scaling HDMI, USB Type C, HDBaseT, and VGA input presentation switch, which allows the user to output at a scaled resolution of the user’s choosing over the mirrored HDMI and HDBaseT outputs. The HDMI and USB-C ports support resolutions up to 4K@60 (4:4:4, 8-bit) while the HDBaseT output supports automatic down-conversion of 4K60(4:4:4) sources to 4K60(4:2:0). The VGA inputs support resolutions up to WUXGA. The HDBaseT output provides a great solution to extend your audio and video up to 70 meters (at 4K) over a single run of Cat.5e/6/7 cable as well as providing 48V PoH power to compatible HDBaseT Receivers.
GOOBAY-58980-Manual HDMI™ mini switch box, 2 In / 1 Out
AED0.00
Tax included
0 Review(s) 
for connecting up to two source devices to one television set, for example supports 3D and HDTV with a resolution of up to 1080p (full HD) HDCP pass-through supports uncompressed audio formats such as LPCM supports audio formats such as DTS Digital and Dolby Digital (including DTS-HD and Dolby TrueHD) easy to install and use no power supply required Technical specifications Connections Connection, type HDMI™ female (Type A) Device connections Input, type 2 HDMI™ female (Type A) number of inputs 2 pcs. Output, type HDMI™ male (type A) Number of outputs 1 ports Signal transmission supported audio standards DTS®, DTS-HD HR, DTS-HD MA, Dolby Digital 5.1 (AC-3), 3D, LPCM 2.0, LPCM 5.1, LPCM 7.1
CYP-SDV-FTRX SDVoE 4KUHD (6G) HDMI over Fiber Transceiver
AED0.00
Tax included
0 Review(s) 
The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency.Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.
CYP-PRO-F12TX 4K UHD HDMI over Fiber Transmitter
AED0.00
Tax included
0 Review(s) 
The PRO-F12TX from CYP is a HDMI over Fiber Transmitter designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable. The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options
MDT-SCN-BWM55.02-To fit 55mm systems/ranges,White matt finish
AED0.00
Tax included
Last items in stock
0 Review(s) 
The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitoring. The brightness of the room is measured by the integrated light sensor and made available as an object. SCN-BWM55.G2-White glossy finish
CYP-PRO-F21RX 4K UHD HDMI over Fiber Receiver
AED0.00
Tax included
0 Review(s) 
The PRO-F21RX from CYP is a HDMI over Fiber Receiver designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable . The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options.
MDT-VC-0701.04 - 7" / 17,7cm capacitive True Glass TFT Display, Flush mounted
AED0.00
Tax included
Last items in stock
0 Review(s) 
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions. Optional: VCB-07WS.04 Glass cover frame white To fit VC0701.04 touchpanel VCB-07SW.04 Glass cover frame black To fit VC0701.04 touchpanel VCB-07SI.04 Cover frame brushed stainless steel look To fit VC0701.04 touchpanel
CYP-IP-6000TX HDMI or VGA over IP Transmitter with USB support (4K, HDCP2.2)
AED0.00
Tax included
0 Review(s) 
​The PU-IP6000TX transmitter allows you to transmit HDMI or VGA signals over CAT5e/6/7 network cable. This extender is multi-function transmitter that supports the transmission of Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.  The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks. 
MDT-VC-1001.04 - 10" / 25,6cm capacitive True GlassTFT Display, Flush mounted
AED0.00
Tax included
0 Review(s) 
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions. Optional: VCB-10WS.04 Glass cover frame white To fit VC1001.04 touchpanel VCB-10SW.04 Glass cover frame black To fit VC1001.04 touchpanel VCB-10SI.04 Cover frame brushed stainless steel look To fit VC1001.04 touchpanel
CYP-IP-6000RX HDMI or VGA over IP Receiver with USB support (4K, HDCP2.2)
AED0.00
Tax included
0 Review(s) 
​​The PU-IP6000RX receiver allows you to receive HDMI or VGA signals over CAT5e/6/7 network cable. This extender is a multi-function receiver that supports Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.  The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks. 
CYP-IP-7000RX HDMI or VGA Video Extender (4K) over IP/CEC/PoE
AED0.00
Tax included
0 Review(s) 
​The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE. The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.