Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Trending
Special Products
There are 395 products.
Active filters
- Price: AED0.00 - AED1.00
CYP-PUV-2010TXWP 100m HDBaseT™ 2.0 Wall Plate Transmitter (4K, HDCP2.2, PoH, LAN, OAR, USB)
AED0.00
Tax included
The PUV-2010TX Wall Plate Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding of installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
CYP-PUV-2600RX HDMI over HDBaseT 2.0 4KUHD Receiver with Balanced Audio Breakout and Bi-directional USB Configuration
AED0.00
Tax included
The PUV-2600RX HDBaseT 2.0 receiver is designed for use in environments that require a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analogue stereo audio breakout is also provided (LPCM 2.0 sources only) allowing audio from the receiver to be integrated with local amplifeir or active speakers. The HDBaseT input not only supports video and audio but also bidirectional Ethernet, RS-232, USB, and IR.
CYP-PUV-2100TX-AVLC 4KUHD HDR HDMI over HDBaseT Transmitter with IR, RS232, PoH, Lan & ARC
AED0.00
Tax included
The PUV-2100TX-AVLC is a HDBaseT 2.0 Transmitter delivering 4K video with HDR and high bitrate audio over a single Cat.6a/7 cable at distances of up to 100m (328 feet). This Transmitter is compliant with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when connected to a compatible AVLC Receiver or the INX-2100-AVLC Matrix Board. This transmitter can also pass RS-232, IR, Ethernet, and multiple audio streams across the same cable that carries the video signal.
CYP-PUV-2100RX-AVLC 4KUHD HDR HDMI over HDBaseT Receiver with IR, RS232, PoH, Lan & ARC
AED0.00
Tax included
The PUV-2100RX-AVLC is a HDBaseT 2.0 Receiver capable of receiving 4K video with HDR and high bitrate audio over a single Cat.6a/7 cable at distances of up to 100m (328 feet). This Receiver complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards.
CYP-PUV-POH PoH/PoE Power Injector
AED0.00
Tax included
The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you to decide whether the power is active for both channels and thus powering both the up and downstream connected HDBaseT products. The PUV-POH supports the full HDBaseT specification up to 10.2Gbps.
The PUV-POH can be used any HDBaseT product within the range that does not provide power, specifically, when used in conjunction with the PUV-1600 series.
CYP-QU-10-4K22 1 to 10 HDMI Distribution Amplifier (4K, HDCP2.2, HDMI2.0)
AED0.00
Tax included
The QU-10-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to ten identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
CYP-QU-16E-4K 1 to 16 HDMI Distribution Amplifier (4K Resolution Support)
AED0.00
Tax included
Last items in stock
The QU-16E-4K is a versatile 1 to 16 HDMI distribution amplifier. This product is designed to be used in a 19” rack and will distribute uncompressed HDMI signals up to 4K resolutions. Each buffered output can run 1080p/8-bit up to 10 metres and can be cascaded up to two layers.
CYP-QU-2-4K22 1 to 2 HDMI Distribution Amplifier (4K, HDCP2.2, HDMI2.0, 18 GBPS)
AED0.00
Tax included
Last items in stock
The QU-2-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to two identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported.
When a mixture of displays with different specifications and resolutions are connected, each output can automatically scale 4K to 1080p or apply color space conversion (4:4:4 to 4:2:0), as appropriate, based on each connected display’s EDID requirements. CEC “active source” command can be enabled to periodically reset input selection on CEC compatible connected displays.
CYP-QU-4-4K22 1 to 4 HDMI Distribution Amplifier (4K HDR (6G), HDCP2.2, HDMI2.0, Scaling)
AED0.00
Tax included
Last items in stock
This QU-4-4K22 is more than just a Distribution Amplifier, it provides high performance audio and video support including HDR and other features defined by the HDMI 2.0a specification. 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be 'Split' to the 4 x HDMI outputs. Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio sampling rates up to 192kHz are also supported. An independent HDCP management engine for each output ensures stable HDCP performance.
CYP-QU-28S-4K22 1 to 8 (2 x 4 Group Mode) HDMI Switching Distribution Amplifier (4K, HDCP2.2, HDMI2.0, 18Gbps)
AED0.00
Tax included
Last items in stock
The QU-28S-4K22 is an advanced signal distribution tool providing high performance audio and video support including HDR and other features defined by the HDMI 2.0a specification. 4K HDR video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be distributed across the 8 outputs. Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio sampling rates up to 192kHz are also supported. An independent HDCP management engine for each output ensures stable HDCP performance.
GOOBAY-58965-Digital/analogue audio converter
AED0.00
Tax included
converts digital electronic signals into analogue audio signals
converts digital electronic signals into analogue audio signals
use for connecting to audio amplifier or AV receiver if there are no digital audio inputs
supports sampling rates of 32, 44.1, 48, 96 and 192 KHz
compact housing
easy to install and use
GOOBAY-58977-HDMI™ Splitter, 1 In / 2 Out (Full HD)
AED0.00
Tax included
distributes an HDMI™ signal across up to two screens
supports 4K Ultra HD @ 30 Hz
active signal amplification enables distances of up to 15 m
supports 3D, HDCP 1.4
supports 7.1-Ch and DTS-HD Master Audio
shielded metal housing
24-karat gold-plated contacts
GOOBAY-58978-HDMI™ Splitter- 1 In / 4 Out (Full HD)
AED0.00
Tax included
distributes 4 HDMI™ signals with a number of different resolutions as well as multi-channel audio in the mix across up to two screens
supports 4K, 3D and Full HD (1080p)
can assign either one or multiple sources to the HDMI™ outputs
smart, automatic function for switching to active inputs is integrated
supports uncompressed audio formats such as LPCM
supports audio formats such as DTS Digital and Dolby Digital (including DTS-HD and Dolby TrueHD)
supports HDCP
shielded metal housing and 24-karat gold-plated contacts
Technical specifications
Connections
Connection, type
HDMI™ female (Type A)
MDT-SCN-P360D1.01-Presence detector
AED0.00
Tax included
The presence detector is available in several versions, as a presence detector with light sensor or as a presence detector with light sensor and constant light control. The presence detectors detect the smallest movements with 1-4 pyro detectors and a high-resolution lens.
Production in Engelskirchen, certified according to ISO 9001
Extended application *
1,3, or 4 sensors with lens for presence detection
Adjustable readiness and presence sensitivity forday, night and alarm *
Range 11m Ø, presence 5m Ø
MDT-AMS-1216.02-Switch actuator
AED0.00
Tax included
The MDT switching actuator receives KNX / EIB telegrams and, depending on the expansion stage, switches up to 12 consumers independently of one another. The switch actuators enable current measurement per channel as well as measurement of the total current. Depending on the parameterization, the measured values are sent to the KNX bus in different data formats (mA / A / kW).
Production in Engelskirchen, certified according to ISO 9001
Button for manual operation and LED display per channel
Normally open and normally closed operation
Time functions (switch-on / switch-off delay, staircase lighting function)
Feedback function (active / passive) for all channels
Logical links, 8 scenes per channel
Operating hours counter
MDT-AIO-0210V.01-Analog input / output
AED0.00
Tax included
The MDT analog input / output is suitable for controlling devices with 0-10V inputs and for recording 0-20mA / 0-10V measurement data. All channels are galvanically isolated from the KNX bus and can be configured as inputs or outputs independently of one another. The input voltage range is 0-10V or 2-10V, the inputs can optionally also be operated as a current loop with 0-20mA or 4-20mA.
Production in Engelskirchen, certified according to ISO 9001
Each channel can be configured independently (input / output)
Inputs / outputs galvanically isolated from the bus
Inputs / outputs galvanically connected to one another
Voltage for output operation is generated in the actuator
No external power supply necessary
MDT-BE-TA55P4.01-4-fold Plus button
AED0.00
Tax included
Flush-mounted device, 55mm, pure white matt, status and orientation LED
The MDT button triggers KNX / EIB telegrams when the button is pressed, depending on the parameterization.
Production in Engelskirchen, certified according to ISO 9001
Suitable for 55mm switch programs e.g.- GIRA Standard 55, E2, E22, Event, Esprit- BERKER S1, B3, B7- JUNG A 500, A PLUS, A CREATION, AS 500, A550, A FLOW- MERTEN 1M, M-Smart , M-Plan, M-Pure
The buttons can be freely set as a button pair or as individual buttons
Normally open or normally closed operation, length of key press adjustable
MDT-BE-GTL2TS.D1-Glass push button II Light 2-way, white, version I / O and I / O UP / DOWN symbol, with temperature sensor
AED0.00
Tax included
The MDT Glass Push Button II Light triggers KNX telegrams after touching it, depending on the parameterization. The sensor areas can be set as a pair of buttons (two-sided) or as individual buttons (BE-GTL4xx.01: 4 individual sensor areas). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness can be controlled via a day / night and brightness object. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The glass push button II Light has 4 integrated logic modules and a slap function with an additional switching channel. A second object can be sent via the logic modules.
MDT-BE-TAL55B1.01-Light 55 Basic button 1-fold, pure white glossy
AED0.00
Tax included
The MDT button Light 55 Basic triggers KNX telegrams after the buttons are pressed, depending on the parameterization. The buttons can be set as a pair of buttons (two-sided) or as individual buttons. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Light 55 Basic button has 4 integrated logic modules.
MDT-BE-TAL55B2.01-Light 55 Basic button 2-fold, pure white glossy
AED0.00
Tax included
The MDT button Light 55 Basic triggers KNX telegrams after the buttons are pressed, depending on the parameterization. The buttons can be set as a pair of buttons (two-sided) or as individual buttons. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Light 55 Basic button has 4 integrated logic modules.
MDT-BE-TAL5501.01-Light button 55 Single, pure white glossy, NEUTRAL version
AED0.00
Tax included
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAL5502.01-Light button 55 Double, pure white glossy, NEUTRAL version
AED0.00
Tax included
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAL5502.B1-Light button 55 2-fold, pure white glossy, version I / O symbol
AED0.00
Tax included
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAL5502.C1-Light button 55 Double, pure white glossy, design UP / DOWN and I / O symbol
AED0.00
Tax included
There are not enough products in stock
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAL5502.D1-Light button 55 2-fold, pure white glossy, version I / O and UP / DOWN symbol
AED0.00
Tax included
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAL5504.01-Light button 55 4-fold, pure white glossy, NEUTRAL version
AED0.00
Tax included
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TAS5504.01-Smart 55 button 4-fold with color display, pure white glossy
AED0.00
Tax included
The MDT button Smart 55 with color display triggers KNX telegrams after pressing the buttons, depending on the parameterization. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness can be controlled via a day / night and brightness object. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Smart 55 push button has 4 integrated logic modules.
MDT-BE-TAL6301.01-Light button 63 1-fold, studio white glossy, NEUTRAL version
AED0.00
Tax included
The MDT button Light 63 triggers KNX telegrams after the buttons are pressed, depending on the parameterization. The buttons can be set as a pair of buttons (two-sided) or as individual buttons (BE-TAL63x4.01: 4 individual buttons). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness can be controlled via a day / night and brightness object. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Light 63 button has 4 integrated logic modules.
MDT-BE-TAL6301.B1-Light button 63 1-way, studio white glossy, version I / O symbol
AED0.00
Tax included
The MDT button Light 63 triggers KNX telegrams after the buttons are pressed, depending on the parameterization. The buttons can be set as a pair of buttons (two-sided) or as individual buttons (BE-TAL63x4.01: 4 individual buttons). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness can be controlled via a day / night and brightness object. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Light 63 button has 4 integrated logic modules.