Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Trending
Special Products
There are 395 products.
Active filters
- Price: AED0.00 - AED1.00
DVDO-VGAHDMI-1-VGA to HDMI Converter
AED0.00
Tax included
Metal converter transmits VGA and stereo audio signal to HDMI output
More suitable for installation requirement
VGA resolution up to 1920x1200@60Hz
Supports fixed EDID mode
Supports stereo audio input
Superior ESD protection
DVDO-DAConv-1-Digital to Analog Converter (Coaxial/Toslink in - Analog out)
AED0.00
Tax included
Converts Coaxial or TOSLINK digital audio to analog audio
Supports 32, 44.1, 48 & 96KHz sampling rates
Supports 24-bit S/PDIF bit-stream audio
CYP-XA-HSP HDMI Surge Protection Tool
AED0.00
Tax included
Designed to help protect your HDMI devices, the XA-HSP is a crucial tool when installing HDMI systems in locations where there can be power fluctuations caused by unstable mains power or where the site is susceptible to earthing problems or lightning strikes. Installers feedback has identified this as an issue in some geographical locations worldwide, along with applications for test beds, outside broadcast vehicles, old buildings such as places of worship, and for marine installations to name a few examples. As a completely passive device, there is no need for a PSU to be connected and thus simply connecting the XA-HSP in-line on the HDMI signal path will protect all HDMI equipment from voltage surges.
CYP-AU-11HB Audio only HDMI bridge
AED0.00
Tax included
The AU-11HB Audio Source to HDMI Bridge is designed integrate audio only sources into video distribution systems. It will accept digital (optical) or analogue (L/R Stereo) audio signals and output them over HDMI. This clever device also adds a 'blue-screen' video feed into the HDMI signal path so that any HDMI AV receiver or display will accept the audio signal for sound reproduction. It allows audio signals from any source to be easily integrated into a HDMI system which is particularly useful when distributing independent audio and video sources via a HDMI or HDBaseT matrix, including the ability to seamlessly integrate SONOS.
CYP-AU-D250 Advanced Digital Audio Converter
AED0.00
Tax included
The AU-D250 is designed to integrate and convert both analogue and digital audio signals into any AV system. This device has an in-built sample rate converter which can upscale audio signals between 44.1kHz to 192kHz (24 bit). With HDMI connectivity, allowing the user to embed or de-embed audio within the HDMI signal path, the AU-D250 not only provides a truly enhanced listening experience, but also the flexibility to manage all audio signals in your AV system.
CYP-SY-300H HDMI to HDMI Scaler with Audio Embedding & De-Embedding
AED0.00
Tax included
The SY-300H will allow a HDMI source signal to be scaled up or down to a variety of different resolutions selectable via the OSD (On Screen Display). When set to 'native' mode, the scaler will automatically scale the HDMI input signal to the native resolution of the connected screen. This device also provides 50/60Hz frame rate conversion further enhancing compatibility with AV sources and displays.
In addition, the SY-300H includes integrated audio embedding and de embedding using the Toslink and 3.5mm jack inputs and outputs.
CYP-AU-DTI4-TX Dante Transmitter with 4 Channels of balanced Mono inputs
AED0.00
Tax included
The AU-DTI4-TX is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.
Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.
CYP-AU-DTO4-RX Dante Transmitter with 4 Channels of balanced Mono inputs
AED0.00
Tax included
The AU-DTO4-RX is a Dante input to 4-channel analogue audio output receiver. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.
Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.
CYP-PUV-44XPL-4K22-KIT 4 x 4 HDMI HDBaseT™ LITE Matrix
AED0.00
Tax included
with 2x Independent HDMI outputs & Audio De-embedding (4K, HDCP2.2, PoH, 60m) inc. 4x PUV-1210PL-RX Receivers
The PUV-44XPL-4K22-KIT is a HDMI/HDBaseT LITE Matrix which supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT LITE outputs and 2 independent HDMI outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
CYP-PUV-44XPL-AVLC-KIT 4 x 4 HDMI HDBaseT™ LITE Matrix
AED0.00
Tax included
The PUV-44XPL-AVLC is the next generation of 4 x 4 matrices from CYP, taking much of its heritage from the successful PUV-44XPL-4K22. The Matrix supports the transmission of video (resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT outputs. Despite the 10.2Gbps limitation of HDBaseT™ technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (including Dolby Vision) to be extended to a compatible receiver included in the kit.
CYP-AU-11SA De-embed Audio from HDMI (7.1)
AED0.00
Tax included
The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your audio format to your amplifier.This device has advanced firmware allowing audio to be de-embedded without the need to connect the HDMI display (no sink-end required).
CYP-EL-42S 4-Way HDMI Switcher with 2 Identical Outputs
AED0.00
Tax included
The EL-42S switcher allows the user to input four HDMI sources and switch between these sources to display HD content on 2 displays. This switcher can be controlled via the supplied remote control, RS-232, or by using the input switching button on the front of the device.
MDT-OR-42-4K22 4 x 2 HDMI Matrix Switcher (4K, HDCP2.2, HDMI2.0)
AED0.00
Tax included
This 4x2 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to either of the two connected HDMI displays. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
CYP-EL-8500VA Advanced 4K HDMI, USB Type C, VGA, and HDBaseT Presentation Switch
AED0.00
Tax included
The EL-8500VA is a multi-format scaling HDMI, USB Type C, HDBaseT, and VGA input presentation switch, which allows the user to output at a scaled resolution of the user’s choosing over the mirrored HDMI and HDBaseT outputs. The HDMI and USB-C ports support resolutions up to 4K@60 (4:4:4, 8-bit) while the HDBaseT output supports automatic down-conversion of 4K60(4:4:4) sources to 4K60(4:2:0). The VGA inputs support resolutions up to WUXGA. The HDBaseT output provides a great solution to extend your audio and video up to 70 meters (at 4K) over a single run of Cat.5e/6/7 cable as well as providing 48V PoH power to compatible HDBaseT Receivers.
GOOBAY-58980-Manual HDMI™ mini switch box, 2 In / 1 Out
AED0.00
Tax included
for connecting up to two source devices to one television set, for example
supports 3D and HDTV with a resolution of up to 1080p (full HD)
HDCP pass-through
supports uncompressed audio formats such as LPCM
supports audio formats such as DTS Digital and Dolby Digital (including DTS-HD and Dolby TrueHD)
easy to install and use
no power supply required
Technical specifications
Connections
Connection, type
HDMI™ female (Type A)
Device connections
Input, type
2 HDMI™ female (Type A)
number of inputs
2 pcs.
Output, type
HDMI™ male (type A)
Number of outputs
1 ports
Signal transmission
supported audio standards
DTS®, DTS-HD HR, DTS-HD MA, Dolby Digital 5.1 (AC-3), 3D, LPCM 2.0, LPCM 5.1, LPCM 7.1
CYP-SDV-FTRX SDVoE 4KUHD (6G) HDMI over Fiber Transceiver
AED0.00
Tax included
The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency.Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.
CYP-PRO-F12TX 4K UHD HDMI over Fiber Transmitter
AED0.00
Tax included
The PRO-F12TX from CYP is a HDMI over Fiber Transmitter designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable.
The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options
CYP-PRO-F21RX 4K UHD HDMI over Fiber Receiver
AED0.00
Tax included
The PRO-F21RX from CYP is a HDMI over Fiber Receiver designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable . The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options.
CYP-IP-6000TX HDMI or VGA over IP Transmitter with USB support (4K, HDCP2.2)
AED0.00
Tax included
The PU-IP6000TX transmitter allows you to transmit HDMI or VGA signals over CAT5e/6/7 network cable. This extender is multi-function transmitter that supports the transmission of Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
CYP-IP-6000RX HDMI or VGA over IP Receiver with USB support (4K, HDCP2.2)
AED0.00
Tax included
The PU-IP6000RX receiver allows you to receive HDMI or VGA signals over CAT5e/6/7 network cable. This extender is a multi-function receiver that supports Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
CYP-IP-7000RX HDMI or VGA Video Extender (4K) over IP/CEC/PoE
AED0.00
Tax included
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
CYP-IP-7000TX HDMI or VGA Video Transmitter (4K) over IP/CEC/PoE
AED0.00
Tax included
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
CYP-PU-USB2-KIT USB 2.0 transmitter/receiver kit
AED0.00
Tax included
The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable with high-quality, uncompressed, multi-application data streams of USB.
This features 1 host to 4 devices, all housed in a compact housing.
ZEBRAGO - WiFi in Wall Smart Light Switch ( 1 Gang)
AED0.00
Tax included
smart touch switch
WiFi touch switch, No neutral (100-240VAC 50/60Hz), 86*86mm', 10A, White.
ZEBRAGO - WiFi in Wall Smart Light Switch ( 2 Gang)
AED0.00
Tax included
smart touch switch
WiFi touch switch, No neutral (100-240VAC 50/60Hz), 86*86mm', 10A, White.
ZEBRAGO - WiFi in Wall Smart Light Switch ( 3 Gang)
AED0.00
Tax included
smart touch switch
WiFi touch switch, No neutral (100-240VAC 50/60Hz), 86*86mm', 10A, White.
TYBA - Turn 2™
AED0.00
Tax included
The control you need, where you need it.
Turn 2™ works natively with Crestron, KNX®, and Control4®, providing the flexibly to integrate with an almost unlimited range of products and brands.
TYBA - MUSE - D16 & D64
AED0.00
Tax included
The playback platform for endless streaming.
The Muse Audio System is a powerful playback platform for streaming audio to a near endless number of Dante/AES67 end points. Whether your application requires scalability or simply a focus on high quality music reproduction, Muse has it covered.
ZENNIO - ZN1CL-IRSC
AED0.00
Tax included
There are not enough products in stock
Bus KNX to IR
A/C Unit control device
IR-KNX Bus unidirectional open protocol interface. IRSC OPEN is a KNX BUS interface that allows control of audio/video consumer electronics via an infrared transmitter.
ECOBEE - 3 LITE
AED0.00
Tax included
There are not enough products in stock
ecobee3 lite heats and cools more efficiently over time by factoring in weather patterns and HVAC system performance. Plus, monthly energy reports show how much you saved and how to save even more.