Trending
Special Products
There are 144 products.
CYP-PU-IR01-KIT Infra red over CAT5/6 Extender Set
AED0.00
Tax included
The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment.
CYP-QU-12D 1 to 2 DVI Distribution Amplifier
AED0.00
Tax included
QU-12D 1 to 2 DVI Distribution Amplifier
The QU-12D is a high performance, HDCP compliant, DVI distribution amplifier allowing one DVI input to be distributed to two displays simultaneously. Each of the buffered outputs can run up to 15 meters (8-bit) and can be cascaded up to 3 layers.
CYP-QU-14D 1 to 4 DVI Distribution Amplifier
AED0.00
Tax included
QU-14D 1 to 4 DVI Distribution Amplifier
The QU-14D is a high performance, HDCP compliant, DVI distribution amplifier allowing one DVI input to be distributed to four displays simultaneously. Each of the buffered outputs can run up to 15 meters (8-bit) and can be cascaded up to 3 layers.
CYP-QU-12S 2-Way HDMI Splitter
AED0.00
Tax included
QU-12S 2-Way HDMI Splitter
The QU-12S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to two identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
CYP-QU-8MS 1 to 8 HDMI Distribution Amplifier with System Reset
AED0.00
Tax included
QU-8MS 1 to 8 HDMI Distribution Amplifier with System Reset
The QU-8MS Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is 3D compatible and features a 3D signal indicator which confirms when a 3D source signal is detected. The System Reset Function switch generates a command every 10 minutes to the connected displays which resets them to the correct HDMI input. Each buffered output can run 1080p/8-bit up to 15 metres and can also be cascaded in multiple layers.
CYP-EL-41SY 4-Way HDMI Switcher
AED0.00
Tax included
EL-41SY 4-Way HDMI Switcher
The EL-41SY switcher allows the user to input four HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher has an auto-detect function which will switch the unit when a source which is powered ‘On’. It can also be controlled via the supplied remote control or by using the input switching button on the front of the device.
CYP-EL-31SY 3-Way HDMI Switcher
AED0.00
Tax included
EL-31SY 3-Way HDMI Switcher
The EL-31SY switcher allows the user to input three HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher can be controlled via the supplied remote control or by using the input switching button on the front of the device.
CYP-EL-21SY 2-Way HDMI Switcher
AED0.00
Tax included
EL-21SY 2-Way HDMI Switcher
The EL-21SY switcher accepts two HDMI inputs and allows the user to switch between two input sources to provide a single HDMI output for connection to the HDMI display. This switcher has an auto-detect function which will switch the unit when a source which is powered ‘On’. Alternatively, the input can be selected manually using the input selection button on the device.
CYP-EL-41S-4K22 4-Way HDMI Switcher (4K, HDCP2.2, HDMI2.0, IR)
AED0.00
Tax included
EL-41S-4K22 4-Way HDMI Switcher (4K, HDCP2.2, HDMI2.0, IR)
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41S-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. Control is via IR remote control and RS-232.
CYP-AU-1HARC HDMI to Stereo Audio (2 Phono) ARC extractor
AED0.00
Tax included
The AU-1HARC is designed to extract the audio signal from any ARC (Audio Return Channel) enabled HDTV and convert it to a line-level analogue stereo signal. This device is perfect for use with HDTV's with no dedicated audio output allowing the audio to be extracted from the ARC enabled HDMI connection and sent to a non-HDMI equipped amplifier, AVR, or active speakers. It supports HDMI audio sampling rates up to 192 kHz and provides an analogue 2-channel stereo output using the integrated DAC (Digital to Analogue Converter).
CYP-CM-388M HDMI Down-Scaler with Bypass Output
AED0.00
Tax included
There are not enough products in stock
The CM-388M is designed to convert digital signals from a HDMI (or DVI + Coaxial) source to Composite Video or S-Video for NTSC or PAL systems with L/R stereo audio. Besides Composite Video and S-Video outputs, this device also provides one HDMI bypass output to deliver the original signal, and a simultaneous Coaxial output to send S/PDIF digital audio to an audio amplifier.
CYP-PUV-2010TXWP-100m HDBaseT™ 2.0 Wall Plate Transmitter
AED0.00
Tax included
There are not enough products in stock
PUV-2010TXWP 100m HDBaseT™ 2.0 Wall Plate Transmitter (4K, HDCP2.2, PoH, LAN, OAR, USB)
The PUV-2010TX Wall Plate Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology
CYP-PUV-2010RXWP-100m HDBaseT™ 2.0 Wall Plate Receiver
AED0.00
Tax included
There are not enough products in stock
PUV-2010RXWP 100m HDBaseT™ 2.0 Wall Plate Receiver (4K, HDCP2.2, PoH, LAN, OAR, USB)
The PUV-2010RXWP UK Wall Plate Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m.
CYP-DS-MSC14-4K22-1×4 4K UHD Video Wall Controller
AED0.00
Tax included
The DS-MSC14-4K22 has been designed to provide an easier and more convenient way to create and deploy video wall installations.
Delivering complete scalability, and capable of driving up to four 1080p displays, all from a single 4K UHD source. For larger installations multiple DS-MSC14-4K22 units can be combined to create up an 8x8 configuration.
CYP-PU-515PL-TX-HDMI over Single CAT5e/6/7 HDBaseT™ Transmitter
AED0.00
Tax included
HDMI over Single CAT5e/6/7 HDBaseT™ LITE Transmitter with PoC and 2-Way IR (up to 60m)
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-PU-515PL-RX-HDMI over Single CAT5e/6/7 HDBaseT™ Receiver
AED0.00
Tax included
PU-515PL-RX HDMI over Single CAT5e/6/7 HDBaseT™ LITE Receiver with PoC and 2-Way IR (up to 60m)
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-QU-18S 1 to 8 Rack Mountable HDMI Distribution Amplifier
AED0.00
Tax included
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
CYP-AU-D4 Analogue Audio Converter
AED0.00
Tax included
The AU-D4 is designed to convert analogue stereo audio to Digital Coaxial and Optical (Toslink) outputs simultaneously.
CYP-AU-D6-192 USB Digital Audio Converter (192KHz/24-bit)
AED0.00
Tax included
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio Class 2.0 source such as a Laptop or PC and convert it to high quality 2 channel linear PCM optical digital output (TOSLink) for use with an external amplifier or active speakers with a optical digital input. It utilises a superior USB Audio processor (xMos U8A) with a maximum sampling rate up to 192kHz/24-bit providing an improved frequency response for better audio reproduction. Microsoft Windows and Mac OS X compatible.
CYP-AU-IP21 IP Audio Controller
AED0.00
Tax included
The AU-IP21 has the choice of Optical or analogue stereo inputs, outputting to analogue L/R with the choice of mono or stereo. Telnet and Web GUI control provide remote control over a network. The Web GUI inputs labels can be edited allowing the user to customize the interface. Ideal for adding remote volume control to amplification systems.
CYP-PU-1106RX HDMI over CAT5e/6 Receiver with IR Receiver
AED0.00
Tax included
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX Transmitters.
CYP-PU-1106TX HDMI over CAT5e/6 Transmitter with IR Blaster
AED0.00
Tax included
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver.
CYP-PU-1107RX Pure digital HDMI over Single CAT6 Receiver
AED0.00
Tax included
The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.
CYP-PU-1107TX Pure digital HDMI over Single CAT6 Transmitter with Repeater function
AED0.00
Tax included
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
CYP-PU-1H2HBTE 1 HDMI to 2 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTE 1 HDMI to 3 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTPL 1 HDMI to 3 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-1H7HBTE 1 HDMI to 7 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H7HBTPL 1 HDMI to 7 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-232 RS-232 Control Over CAT5/6 Extender Set
AED0.00
Tax included
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 metres. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.