Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Trending
Special Products
There are 372 products.
Network cable tester Firewire
AED0.00
Tax included
for testing CAT 5/6 network and ISDN connections
has RJ11, RJ45, USB (type A), Mini USB (type B), and IEEE1394 6pin Firewire socket
checks lines for short circuit, wire reversal, and cable defect
connection tester with integrated LED display for 8 individual cores
power supply is a 9 V block (not included in delivery)
protective pouch included in delivery
CYP-AU-1HARC HDMI to Stereo Audio (2 Phono) ARC extractor
AED0.00
Tax included
The AU-1HARC is designed to extract the audio signal from any ARC (Audio Return Channel) enabled HDTV and convert it to a line-level analogue stereo signal. This device is perfect for use with HDTV's with no dedicated audio output allowing the audio to be extracted from the ARC enabled HDMI connection and sent to a non-HDMI equipped amplifier, AVR, or active speakers. It supports HDMI audio sampling rates up to 192 kHz and provides an analogue 2-channel stereo output using the integrated DAC (Digital to Analogue Converter).
ZENNIO - ZN1CL – KLIC-DI -KNX Logical Interface for Climate
AED0.00
Tax included
KNX Logical Interface for Climate
ZN1CL – KLIC-DI
FEATURES
Duplex communication with air conditioners.
Dimensions 90 x 60 x 35mm (2 DIN units).
It can be placed in DIN rail units inside electrical panels or distribution boxes.
Integrated KNX BCU. Conformity with the CE directives
CYP-DS-MSC14-4K22-1×4 4K UHD Video Wall Controller
AED0.00
Tax included
The DS-MSC14-4K22 has been designed to provide an easier and more convenient way to create and deploy video wall installations.
Delivering complete scalability, and capable of driving up to four 1080p displays, all from a single 4K UHD source. For larger installations multiple DS-MSC14-4K22 units can be combined to create up an 8x8 configuration.
CYP-PU-515PL-TX-HDMI over Single CAT5e/6/7 HDBaseT™ Transmitter
AED0.00
Tax included
HDMI over Single CAT5e/6/7 HDBaseT™ LITE Transmitter with PoC and 2-Way IR (up to 60m)
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-PU-515PL-RX-HDMI over Single CAT5e/6/7 HDBaseT™ Receiver
AED0.00
Tax included
PU-515PL-RX HDMI over Single CAT5e/6/7 HDBaseT™ LITE Receiver with PoC and 2-Way IR (up to 60m)
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
GOOBAY-38530-USB-C ™ adapter DisplayPort 4k60Hz, black
AED0.00
Tax included
USB-C ™ plug> DisplayPort socket
mirrors signals from USB-C ™ to DisplayPort devices
suitable for the MacBook with USB-C ™ port
supports a resolution up to 3840 * 2160p @ 60Hz and 3D
very easy to use
CYP-QU-18S 1 to 8 Rack Mountable HDMI Distribution Amplifier
AED0.00
Tax included
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
CYP-AU-D4 Analogue Audio Converter
AED0.00
Tax included
The AU-D4 is designed to convert analogue stereo audio to Digital Coaxial and Optical (Toslink) outputs simultaneously.
1Home KNX Bridge
AED0.00
Tax included
Modern control for modern KNX users, Single sleek mobile app for all your KNX and IoT devices. Secure remote control included.
Voice control via Siri, Alexa and Google Assistant. Be independent in managing your KNX & IoT automation. Even use your location as an automation trigger.
The easiest setup on the market.
CYP-AU-D6-192 USB Digital Audio Converter (192KHz/24-bit)
AED0.00
Tax included
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio Class 2.0 source such as a Laptop or PC and convert it to high quality 2 channel linear PCM optical digital output (TOSLink) for use with an external amplifier or active speakers with a optical digital input. It utilises a superior USB Audio processor (xMos U8A) with a maximum sampling rate up to 192kHz/24-bit providing an improved frequency response for better audio reproduction. Microsoft Windows and Mac OS X compatible.
CYP-AU-IP21 IP Audio Controller
AED0.00
Tax included
The AU-IP21 has the choice of Optical or analogue stereo inputs, outputting to analogue L/R with the choice of mono or stereo. Telnet and Web GUI control provide remote control over a network. The Web GUI inputs labels can be edited allowing the user to customize the interface. Ideal for adding remote volume control to amplification systems.
CYP-PU-1106RX HDMI over CAT5e/6 Receiver with IR Receiver
AED0.00
Tax included
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX Transmitters.
CYP-PU-1106TX HDMI over CAT5e/6 Transmitter with IR Blaster
AED0.00
Tax included
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver.
CYP-PU-1107RX Pure digital HDMI over Single CAT6 Receiver
AED0.00
Tax included
The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.
CYP-PU-1107TX Pure digital HDMI over Single CAT6 Transmitter with Repeater function
AED0.00
Tax included
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
CYP-PU-1H2HBTE 1 HDMI to 2 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTE 1 HDMI to 3 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTPL 1 HDMI to 3 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-1H7HBTE 1 HDMI to 7 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H7HBTPL 1 HDMI to 7 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-232 RS-232 Control Over CAT5/6 Extender Set
AED0.00
Tax included
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 metres. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.
CYP-PU-2H8HBTE-AD 2 x 8 HDBaseT™ Switch with Audio De-Embedding
AED0.00
Tax included
The PU-2H8HBTE-AD HDBaseT switch has two HDMI inputs and eight HDBaseT outputs, plus a single HDMI output. This device allows the user to select either HDMI source for distribution to all screens simultaneously. Each HDBaseT output supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/Telnet IP over a single CAT5e/6/7 cable (up to 100m). The HDMI output supports the same video resolutions and high definition audio via certified HDMI cables up to 15m.
For additional flexibility, the PU-2H8HBTE-AD is provided with Audio De-Embedding functionality allowing easy audio integration into a wider AV system or direct connection to an AVR.
CYP-PU-507RX 5-Play HDBaseT™ Receiver (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
CYP-PU-507TX 5-Play HDBaseT™ Transmitter (inc. PoE & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
CYP-PU-507TX-1H 5-Play HDBaseT™ Transmitter with simultaneous HDMI output (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX-1H Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the popular PU-507-TX Transmitter has a simultaneous HDMI output enabling a local HDMI display to be connected whilst simultaneously distributing the signals over a single CAT5e/6/7 to a compatible HDBaseT Receiver.
CYP-PU-507TX-HDVGA Switchable HDMI & VGA HDBaseT™ Transmitter with integrated video(5-Play™ inc. PoE & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX-HDVGA allows VGA and uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable to lengths of up to 100 metres. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. This transmitter allows the user to select and switch between a HDMI or VGA source whilst the integrated scaler ensures maximum resolution support for the connected display. Additionally, the PU-507TX-HDVGA utilises an auto-scan feature which detects and switches to the last active input.
CYP-PU-507WPRX 5Play™ HDBaseT™ Wall Plate Receiver (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
CYP-PU-514L-RX HDBaseT™ LITE Receiver with 2-way IR (up to 60m)
AED0.00
Tax included
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
CYP-PU-607BD-RX HDMI over Single CAT5e/6/7 HDBaseT™ - Bi-directional PoC Receiver (full 5-Play™ & Single LAN up to 100m)
AED0.00
Tax included
The PU-607BD-RX Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX or PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.