Components
There are 9 products.
MDT-SCN-DALI16.03 4SU MDRC
AED0.00
Tax included
There are not enough products in stock
Production in Germany certified according to ISO 9001
Supports different DALI ECG (DT6/DT8)
Control of up to 16 channels / light groups(switching, dimming, and brightness value)
Innovative HSV colour control, RGB, RGBW and XY colour according to Dali DT8 standard
Tunable White, colour temperature control
Integrated colour control module for at time dependent controlling of the luminous colour in up to 300 steps
Operation modes like normal operation, continuous operation, night operation, stairwell operation and panic operation
Manual operation for all 16 groups
16 scenes with individual dimming times
Energy saving function for switching off the ECGs(via additional KNX switch actuator)
Fault detection of lamp faults and faulty ECGs
3 years warranty
MDT-SCN-DALI32.03 4SU MDRC up to 128 ECG in 32 channels
AED0.00
Tax included
There are not enough products in stock
Production in Germany certified according to ISO 9001
up to 128 ECG in 32 channels/light groups
Supports different DALI ECG (DT6/DT8)
Control of up to 32 channels / light groups(switching, dimming, and brightness value)
Innovative HSV colour control, RGB, RGBW and XY colour according to Dali DT8 standard
Tunable White, colour temperature control
Integrated colour control module for at time dependent controlling of the luminous colour in up to 300 steps
Operation modes like normal operation, continuous operation, night operation, stairwell operation and panic operation
32 scenes with individual dimming times
Energy saving function for switching off the ECGs(via additional KNX switch actuator)
Fault detection of lamp faults and faulty ECGs
3 years warranty
MDT-AKI-1216.04 12SU MDRC Switch Actuator 12-fold
AED0.00
Tax included
There are not enough products in stock
Production in Germany, certified according to ISO 9001
Comprehensive function extension
Mechanical manual operation for direct actuationof the relay contact, status visible
NO and NC contact operation
Status response by manual operation
Time functions (switch-on/switch-off delay)
Extensive staircase light and impulse functions
Extended logical and scene functions for each channel
Extended status functions (inverted, cyclic, at block)
Treshold switch (Byte/2Byte/2Byte float)
Hour meter for switching
Priority/forced operation with automatic release time
4mm² / 2x2,5mm² screw terminals. Separate supply phases
Power supply via KNX bus
Quick application download (long frame support for ETS5)
3 years warranty
MDT-AKK-02UP.03 Flush mounted Switch Actuator 2-fold
AED0.00
Tax included
There are not enough products in stock
Production in Germany, certified according to ISO 9001
Function extension
NO and NC contact operation
Time functions (switch-on/switch-off delay)
Extensive staircase light and impulse functions
Status response (active/passive) for each channel
Logical linking of binary data
Extendend scene functions for each channel
Central switching functions and block functions
Adjustable behavior in case of bus voltage failure (AKK-01UP.02 only)
Adjustable behavior in case of bus voltage return
Flush mounted in an installation box
Dimensions (W x H x D): 41mm x 41mm x 22mm
Quick application download (long frame support for ETS5)
3 years warranty
MDT-AKH-0600.02 Heating Actuator 6-fold 3SU MDRC, to control electrothermic valve drives 24-230VAC
AED0.00
Tax included
There are not enough products in stock
The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.Each channel has its own LED indicator.
MDT-STV-0024.01 Power Supply ,4SU MDRC,750MA 24VDC SELV
AED0.00
Tax included
There are not enough products in stock
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
MDT-BE-TAL6302.A1-Push Button Lite 63,2-fold, white glossy finish, Version UP/DOWN symbol
AED0.00
Tax included
There are not enough products in stock
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object. In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available. The Push Button Lite 63 has 4 integrated logic blocks.
MDT-BE-TAL5502.C1-Light button 55 Double, pure white glossy, design UP / DOWN and I / O symbol
AED0.00
Tax included
There are not enough products in stock
The MDT button Light 55 triggers KNX telegrams after pressing the button, depending on the parameterization.The buttons can be set as a pair of buttons (two-sided) or as individual buttons. Each button surface has 2 RGBW status LEDs. In addition to switching, dimming, blinds or sending values, numerous functions are available. The Light 55 push button has 4 integrated logic blocks.
MDT-BE-TA55P4.G1-4-fold Plus button-Flush-mounted device, 55mm, pure white glossy, status and orientation LED
AED0.00
Tax included
There are not enough products in stock
The MDT button triggers KNX / EIB telegrams when the button is pressed, depending on the parameterization.
Production in Engelskirchen, certified according to ISO 9001
Suitable for 55mm switch programs e.g.- GIRA Standard 55, E2, E22, Event, Esprit- BERKER S1, B3, B7- JUNG A 500, A PLUS, A CREATION, AS 500, A550, A FLOW- MERTEN 1M, M-Smart , M-Plan, M-Pure