MDT-SCN-WS3HW.01-Weather Station Home,Outdoor installation on wall or pole, integrated BCU
AED0.00
Tax included
0 Review(s) 
Weather Station Home 3 channels for sun protection to control blind/shutter Sun protection up to three facades Offers wide functions to control facades (2 switching tresholds,teach in function) Central shutter control for Up/Down via brightness value(with time dealy) Brightness value for east, south, west, twilight Generates a day/night object Wind speed value, alarm if wind speed exceeds limit Temperature value Suited to control facades at home Installation on wall or pole 5m connection cable No additional power supply required Integrated bus coupling unit (control unit) 3 years warranty
MDT- SCN-RS1R.01-Rain Sensor, Outdoor installation on wall, integrated BCU
AED0.00
Tax included
0 Review(s) 
Rain Sensor Production in Germany, certified according to ISO 9001 Automatic heating to keep the sensor area dry Heating operation by choke free output STV-640/STC Series or external 24VDC power supply Current consumption of heating is less than 100mA 5m bus connection cable Stainless fastening angle included in delivery Dimensions (W x H x D): (67mm x 67mm x 29mm) Integrated bus coupling unit 3 years warranty
MDT-SCN-BWM55.02-To fit 55mm systems/ranges,White matt finish
AED0.00
Tax included
Last items in stock
0 Review(s) 
The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitoring. The brightness of the room is measured by the integrated light sensor and made available as an object. SCN-BWM55.G2-White glossy finish
MDT-VC-0701.04 - 7" / 17,7cm capacitive True Glass TFT Display, Flush mounted
AED0.00
Tax included
Last items in stock
0 Review(s) 
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions. Optional: VCB-07WS.04 Glass cover frame white To fit VC0701.04 touchpanel VCB-07SW.04 Glass cover frame black To fit VC0701.04 touchpanel VCB-07SI.04 Cover frame brushed stainless steel look To fit VC0701.04 touchpanel
MDT-VC-1001.04 - 10" / 25,6cm capacitive True GlassTFT Display, Flush mounted
AED0.00
Tax included
0 Review(s) 
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions. Optional: VCB-10WS.04 Glass cover frame white To fit VC1001.04 touchpanel VCB-10SW.04 Glass cover frame black To fit VC1001.04 touchpanel VCB-10SI.04 Cover frame brushed stainless steel look To fit VC1001.04 touchpanel
MDT-RF-GTT4W.01-KNX RF+ Glass Push Button Plus 4-fold with Actuator,White, with temperature sensor
AED0.00
Tax included
0 Review(s) 
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized. Also Available: RF-GTT8S.01 KNX RF+ Glass Push Button Plus 8-fold with Actuator Black, with temperature sensor RF-GTT4S.01 KNX RF+ Glass Push Button Plus 4-fold with Actuator Black, with temperature sensor RF-GTT8W.01 KNX RF+ Glass Push Button Plus 8-fold with Actuator White, with temperature sensor
MDT-RF-TA55A2.01-KNX RF+ Push Button Plus 2-fold with Actuator ,White glossy finish, status and orientation LED
AED0.00
Tax included
0 Review(s) 
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top. Also Available RF-TA55A8.01 KNX RF+ Push Button Plus 8-fold with Actuator White glossy finish, status and orientation LED RF-TA55A4.01 KNX RF+ Push Button Plus 4-fold with Actuator White glossy finish, status and orientation LED RF-TA55A6.01 KNX RF+ Push Button Plus 6-fold with Actuator White glossy finish, status and orientation LED
MDT-SCN-P360D1.01-Presence detector
AED0.00
Tax included
0 Review(s) 
The presence detector is available in several versions, as a presence detector with light sensor or as a presence detector with light sensor and constant light control. The presence detectors detect the smallest movements with 1-4 pyro detectors and a high-resolution lens. Production in Engelskirchen, certified according to ISO 9001 Extended application * 1,3, or 4 sensors with lens for presence detection Adjustable readiness and presence sensitivity forday, night and alarm * Range 11m Ø, presence 5m Ø
MDT-AMS-1216.02-Switch actuator
AED0.00
Tax included
0 Review(s) 
The MDT switching actuator receives KNX / EIB telegrams and, depending on the expansion stage, switches up to 12 consumers independently of one another. The switch actuators enable current measurement per channel as well as measurement of the total current. Depending on the parameterization, the measured values ​​are sent to the KNX bus in different data formats (mA / A / kW). Production in Engelskirchen, certified according to ISO 9001 Button for manual operation and LED display per channel Normally open and normally closed operation Time functions (switch-on / switch-off delay, staircase lighting function) Feedback function (active / passive) for all channels Logical links, 8 scenes per channel Operating hours counter
MDT-AIO-0210V.01-Analog input / output
AED0.00
Tax included
0 Review(s) 
The MDT analog input / output is suitable for controlling devices with 0-10V inputs and for recording 0-20mA / 0-10V measurement data. All channels are galvanically isolated from the KNX bus and can be configured as inputs or outputs independently of one another. The input voltage range is 0-10V or 2-10V, the inputs can optionally also be operated as a current loop with 0-20mA or 4-20mA. Production in Engelskirchen, certified according to ISO 9001 Each channel can be configured independently (input / output) Inputs / outputs galvanically isolated from the bus Inputs / outputs galvanically connected to one another Voltage for output operation is generated in the actuator No external power supply necessary
MDT-BE-TA55P4.01-4-fold Plus button
AED0.00
Tax included
0 Review(s) 
Flush-mounted device, 55mm, pure white matt, status and orientation LED The MDT button triggers KNX / EIB telegrams when the button is pressed, depending on the parameterization. Production in Engelskirchen, certified according to ISO 9001 Suitable for 55mm switch programs e.g.- GIRA Standard 55, E2, E22, Event, Esprit- BERKER S1, B3, B7- JUNG A 500, A PLUS, A CREATION, AS 500, A550, A FLOW- MERTEN 1M, M-Smart , M-Plan, M-Pure The buttons can be freely set as a button pair or as individual buttons Normally open or normally closed operation, length of key press adjustable
MDT-BE-GTL2TS.D1-Glass push button II Light 2-way, white, version I / O and I / O UP / DOWN symbol, with temperature sensor
AED0.00
Tax included
0 Review(s) 
The MDT Glass Push Button II Light triggers KNX telegrams after touching it, depending on the parameterization. The sensor areas can be set as a pair of buttons (two-sided) or as individual buttons (BE-GTL4xx.01: 4 individual sensor areas). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness can be controlled via a day / night and brightness object. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The glass push button II Light has 4 integrated logic modules and a slap function with an additional switching channel. A second object can be sent via the logic modules.
MDT-BE-TAL55B1.01-Light 55 Basic button 1-fold, pure white glossy
AED0.00
Tax included
0 Review(s) 
The MDT button Light 55 Basic triggers KNX telegrams after the buttons are pressed, depending on the parameterization. The buttons can be set as a pair of buttons (two-sided) or as individual buttons. In addition to switching, dimming, blinds, sending scenes or values, numerous functions are available. The Light 55 Basic button has 4 integrated logic modules.