Trending
Special Products
List of products by brand CYP-UK
Since 2010, Graphic Corner offers a large choice of quality posters, available on paper and many other formats.
There are 158 products.
CYP-PRO-F12TX 4K UHD HDMI over Fiber Transmitter
AED0.00
Tax included
The PRO-F12TX from CYP is a HDMI over Fiber Transmitter designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable.
The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options
CYP-PRO-F21RX 4K UHD HDMI over Fiber Receiver
AED0.00
Tax included
The PRO-F21RX from CYP is a HDMI over Fiber Receiver designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable . The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options.
CYP-PU-1106RX HDMI over CAT5e/6 Receiver with IR Receiver
AED0.00
Tax included
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX Transmitters.
CYP-PU-1106TX HDMI over CAT5e/6 Transmitter with IR Blaster
AED0.00
Tax included
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver.
CYP-PU-1107RX Pure digital HDMI over Single CAT6 Receiver
AED0.00
Tax included
The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.
CYP-PU-1107TX Pure digital HDMI over Single CAT6 Transmitter with Repeater function
AED0.00
Tax included
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
CYP-PU-1H2HBTE 1 HDMI to 2 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTE 1 HDMI to 3 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H3HBTPL 1 HDMI to 3 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-1H7HBTE 1 HDMI to 7 HDBaseT™ Splitter (100m) including additional HDMI output
AED0.00
Tax included
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
CYP-PU-1H7HBTPL 1 HDMI to 7 HDBaseT™ LITE Splitter (60m) including HDMI output bypass (with PoC)
AED0.00
Tax included
The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
CYP-PU-232 RS-232 Control Over CAT5/6 Extender Set
AED0.00
Tax included
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 metres. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.
CYP-PU-2H8HBTE-AD 2 x 8 HDBaseT™ Switch with Audio De-Embedding
AED0.00
Tax included
The PU-2H8HBTE-AD HDBaseT switch has two HDMI inputs and eight HDBaseT outputs, plus a single HDMI output. This device allows the user to select either HDMI source for distribution to all screens simultaneously. Each HDBaseT output supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/Telnet IP over a single CAT5e/6/7 cable (up to 100m). The HDMI output supports the same video resolutions and high definition audio via certified HDMI cables up to 15m.
For additional flexibility, the PU-2H8HBTE-AD is provided with Audio De-Embedding functionality allowing easy audio integration into a wider AV system or direct connection to an AVR.
CYP-PU-304-KIT Digital Audio over CAT6 Extender Set
AED0.00
Tax included
PU-304-KIT Digital Audio over CAT6 Extender Set
The PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
CYP-PU-305BD-RX Bi-Directional Digital Audio over Single CAT Receiver
AED0.00
Tax included
PU-305BD-RX Bi-Directional Digital Audio over Single CAT Receiver
The PU-305BD-RX is designed to receive digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-RX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
CYP-PU-305BD-TX Bi-Directional Digital Audio over Single CAT Transmitter
AED0.00
Tax included
PU-305BD-TX Bi-Directional Digital Audio over Single CAT Transmitter
The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
CYP-PU-305BDA-RX Bi-Directional Analogue Audio over Single CAT Receiver
AED0.00
Tax included
PU-305BDA-RX Bi-Directional Analogue Audio over Single CAT Receiver
The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Cable (PoC) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter.
CYP-PU-305BDA-TX Bi-Directional Analogue Audio over Single CAT Transmitter
AED0.00
Tax included
Last items in stock
PU-305BDA-TX Bi-Directional Analogue Audio over Single CAT Transmitter
The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver.
CYP-PU-507RX 5-Play HDBaseT™ Receiver (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
CYP-PU-507TX 5-Play HDBaseT™ Transmitter (inc. PoE & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
CYP-PU-507TX-1H 5-Play HDBaseT™ Transmitter with simultaneous HDMI output (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX-1H Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the popular PU-507-TX Transmitter has a simultaneous HDMI output enabling a local HDMI display to be connected whilst simultaneously distributing the signals over a single CAT5e/6/7 to a compatible HDBaseT Receiver.
CYP-PU-507TX-HDVGA Switchable HDMI & VGA HDBaseT™ Transmitter with integrated video(5-Play™ inc. PoE & single LAN, up to 100m)
AED0.00
Tax included
The PU-507TX-HDVGA allows VGA and uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable to lengths of up to 100 metres. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. This transmitter allows the user to select and switch between a HDMI or VGA source whilst the integrated scaler ensures maximum resolution support for the connected display. Additionally, the PU-507TX-HDVGA utilises an auto-scan feature which detects and switches to the last active input.
CYP-PU-507WPRX 5Play™ HDBaseT™ Wall Plate Receiver (inc. PoC & single LAN, up to 100m)
AED0.00
Tax included
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
CYP-PU-514L-RX HDBaseT™ LITE Receiver with 2-way IR (up to 60m)
AED0.00
Tax included
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
CYP-PU-515PL-RX-HDMI over Single CAT5e/6/7 HDBaseT™ Receiver
AED0.00
Tax included
PU-515PL-RX HDMI over Single CAT5e/6/7 HDBaseT™ LITE Receiver with PoC and 2-Way IR (up to 60m)
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-PU-515PL-TX-HDMI over Single CAT5e/6/7 HDBaseT™ Transmitter
AED0.00
Tax included
HDMI over Single CAT5e/6/7 HDBaseT™ LITE Transmitter with PoC and 2-Way IR (up to 60m)
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
CYP-PU-607BD-RX HDMI over Single CAT5e/6/7 HDBaseT™ - Bi-directional PoC Receiver (full 5-Play™ & Single LAN up to 100m)
AED0.00
Tax included
The PU-607BD-RX Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX or PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
CYP-PU-607BD-TX HDMI over Single CAT5e/6/7 HDBaseT™ - Bi-Directional PoC Transmitter (full 5-Play™ & Single LAN up to 100m)
AED0.00
Tax included
The PU-607BD-TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
CYP-PU-607BDWP-RX HDMI over Single CAT5e/6/7 HDBaseT Bi-Directional PoC Wallplate Receiver (full 5-Play& SingleLAN 100m)
AED0.00
Tax included
The PU-607BDWP-RX Wallplate Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX and PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
CYP-PU-607BDWP-TX HDMI over Single CAT5e/6/7 HDBaseT™ - Bi-Directional PoC Wallplate Transmitter (full 5-Play &SingleLAN 100m)
AED0.00
Tax included
The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.